Space Combat

Overview

The Space Combat window runs a ship-to-ship battle using the Mongoose Traveller 2e space combat rules. It tracks your campaign's ship and every enemy ship: Hull and Armour, Thrust and overloads, Power, fuel, range and bearing, Initiative, sensors and electronic warfare, critical hits, weapons, and missile salvos in flight. It also tells you which modifiers apply to each attack.

The window is the referee's. The crew's view is the Space Combat mode of the Players' Panel, which shows only what the crew can see: their own ship, their duties, the ships and missiles they have detected, and the rules for the current step.

The battle is stored on the selected campaign, so it survives quitting and relaunching the app.

Open it from the Referee menu (Referee ▸ Space Combat, ⇧⌘C).

Quick start

  1. Select the campaign that owns the ship. Without one, the window asks you to select a campaign first.
  2. Press Start Combat. The battle starts with the campaign's ship at the centre of the range display. If the campaign has no ship, you get a blank ship to edit.
  3. Add the enemies with Add Enemy: copies of a ship from your library, or a custom ship. Give each a starting range (most hostile encounters begin at Very Long or Distant), and say whether the crew has already detected it.
  4. Assign crew duties during Round 0 – Setup: pilot, captain, engineer, sensor operator and gunners.
  5. Give enemy crews (optional): NPC Travellers or ad hoc members, so their skills feed Initiative and attacks.
  6. Fill in the details: weapons on each ship, who is surprised, and who is detected.
  7. Press Begin Combat. It rolls Initiative using the duties you assigned, then starts round 1.
  8. Work through the three steps of each round, in Initiative order: Manoeuvre, then Attack, then Actions. Click the segments of the Manoeuvre | Attack | Actions switch in the middle of the toolbar, next to the round number, to move from one step to the next. The app doesn't change step by itself. When all three are done, press Next Round.
  9. Resolve attacks: roll attacks and damage from each weapon, launch missiles, and use point defence or electronic warfare against salvos.
  10. Press Next Round to reset Thrust and point defence, finish reloads and move missile salvos closer.
  11. Press End Combat when it is over. All ships, damage and the log are discarded.

The window

The window has three areas.

  • Left: your ship's panel and the Crew Duties list.
  • Middle: the Initiative strip at the top, the range display, and the log below it.
  • Right: a panel for each enemy ship.

The toolbar shows where the battle stands in the middle: Round 0 – Setup, then Round N with the Step switch. The action buttons are on the right.

Button What it does
Begin Combat Shown during setup. Rolls Initiative using the crew duties assigned now, then starts round 1.
Roll Initiative Shown during the battle. Re-rolls: 2D + the pilot's Pilot skill + Thrust (+ Tactics Effect).
Next Round Resets Thrust and point defence, finishes reloads and moves missile salvos closer.
Add Enemy Adds an enemy ship (at any time).
End Combat Asks for confirmation, then discards the battle.

Starting a battle and adding enemies

Add Enemy opens a sheet with:

  • Source: a saved design from the ship library (a copy is made, so the original isn't changed), or a custom ship with typed-in stats. Weapons are added on the ship's panel afterwards.
  • Starting range: one of the seven range bands, with its distance.
  • Detected: off keeps the ship hidden from the players' panel until you mark it detected.

Crew duties

The Crew Duties list assigns each Traveller in the campaign's crew a duty:

Passenger, Pilot, Captain, Engineer, Sensor Operator, Turret Gunner, Bay Gunner, Marine.

  • Only one Traveller can be Pilot, and only one Captain.
  • A gunner is also assigned the turret or bay they control.
  • During setup (Round 0) a change applies immediately. Begin Combat then rolls Initiative using these assignments.
  • After that a change is a Reassignment. It takes effect next round, and the Traveller does nothing else in the meantime. The queued duty is shown, and the players' panel shows "→ new duty next round".
  • The best skills among the Travellers on each duty are copied onto the ship (pilot, gunner, sensor operator, engineer and leadership).

Player-rolled checks. Everything your own side rolls is player-rolled, as in the Combat Round Tracker: the skill buttons under each crew duty, Roll Attack for a weapon on your ship, weapon damage, missile damage for salvos you fired, and your ship's Initiative. The popover gives the modifiers to tell the player (skill, characteristic and Additional DM, with a reminder to roll 3D and keep the best or worst two for a boon or bane), and you type in the total the player rolled. The app then works out success and Effect, or applies the damage. Enemy crews and enemy weapons are rolled by the app.

Gunners. A gunner assigned to a weapon gets an attack roll from their duty's Gunner button. It is titled "weapon – attack on target", and its Additional DM already includes the weapon's modifiers against the weapon's chosen target: range (for example −2 at Long), the weapon type, target size and sensor lock. It is the same roll as the weapon's Roll Attack button.

The range display

The tactical display shows your ship at the centre, one ring for each range band, and each enemy placed by band and bearing. 0° is straight ahead and bearings run clockwise. The rings are evenly spaced, so the bands are not to scale.

Band Distance
Adjacent 1 km or less
Close 1–10 km
Short 11–1,250 km
Medium 1,251–10,000 km
Long 10,001-25,000 km
Very Long 25,001-50,000 km
Distant More than 50,000 km
  • Drag an enemy to move it. A radial drag snaps to a band, and its bearing changes with the drag. You can also set both on the ship's panel.
  • Drag the arrowhead on your ship to turn its heading.
  • Numbers along the 270° axis show the Thrust needed to change band.
  • Dashed lines join ships to the ships they hold a sensor lock on.
  • Missile salvos are drawn between launcher and target by how far along their flight they are.
  • Undetected ships and missiles are dimmed on your display, and don't appear on the players' at all.
  • Ships within Close range are marked as Dogfight: use the Dogfighting rules (six-second rounds).

Initiative

Initiative is 2D + pilot's Pilot skill + Thrust + Tactics Effect + any Improve Initiative bonus.

  • Begin Combat and Roll Initiative roll it for every enemy ship. Your own ship is left for its player to roll: its panel shows "Tell the player: roll 2D and add +N" with the breakdown, and a Player's 2D field to type the result in. Its Roll button still lets the app roll it for you.
  • On a ship's panel you can type the 2D result of a roll made at the table (2–12), and the rest is added for you. Roll replaces it with the app's dice, and Clear removes it.
  • Tactics Effect is the commander's Tactics (naval) Effect at the start of the battle.
  • Improve Initiative next round is the captain's Leadership check Effect, which applies to the next round only.
  • A surprised ship can take no actions in the first round, and shows an eye-slash in the Initiative strip.

The Initiative strip under the range display lists every ship in order with its total: your ship in blue and enemies in red. A wrecked ship is struck through.

A ship's panel

Your ship and each enemy have the same panel, with these sections.

Hull and damage

  • Hull shows current against starting Hull, and Armour. Hover for the base value and what has been lost.
  • Apply Hit: type the total damage of the attack including its Effect. The Armour is subtracted for you. An Effect of 6 or more with damage is a critical hit of Severity Effect − 5. Choose a called shot location (attacker at Short range or closer, DM−2), or leave it as Roll.
  • Undo Last Hit reverses the Hull, the critical hits it caused, armour, fuel and weapon damage.
  • Repair Hull restores Hull points up to the starting Hull. Damage already sustained still counts toward the 10% sustained-damage critical hits.
  • A Fuel leak from a critical hit is set with the Leak menu.
  • WRECKED is shown when the Hull is gone.

Detected and Surprised

  • Detected: whether the players' crew has detected the ship. The players' panel shows only detected ships.
  • Surprised: it can take no actions in the first round.

Thrust, movement and overloads

  • Thrust shows the current value, the base value if a critical hit has changed it, and the Unspent Thrust. Each point of unspent Thrust lets the pilot dodge one attack with Evasive Action (DM − pilot's skill).
  • Movement and Manoeuvring steppers divide the ship's Thrust between the two.
  • Overload Drive next round: a Difficult (10+) Engineer (m-drive) check for +1 Thrust next round. Each further attempt adds a cumulative DM−2 until maintenance is done.
  • Overload Plant next round: a Difficult (10+) Engineer (power) check for +10% Power next round.
  • Power shows effective against base Power.

Movement and position

On your ship, set the Heading with the slider or by dragging the arrowhead on the range display. The panel shows, for each enemy, its bearing, which way its Movement Thrust is going, and the net closing or opening for the round. Apply Movement then resolves everyone's Movement Thrust together and changes the range to each enemy by the net. Allow Again lets you re-run it.

On an enemy, set its Range and Bearing, and which way it spends its Movement Thrust. It shows the Thrust the next band needs, and how much movement has been banked toward it.

Sensors and electronic warfare

  • Transponder: the ship's transponder mode.
  • Sensor DM and the effects of damage: a disabled sensor suite, a DM−2 penalty to sensor checks, or sensors inoperative beyond a given range.
  • Sensor lock on another ship gives +2 to attacks against it.

Critical hits

Add Critical Hit… rolls a location at Severity 1, or lets you pick the location and Severity. The locations are Sensors, Power Plant, Fuel, Weapon, Armour, Hull, M-Drive, Cargo, J-Drive, Crew and Bridge.

Each hit in the list shows its Severity, and has:

  • Repair Round: an Average (8+) Engineer check (1 round, INT or EDU) with DM −Severity, and a cumulative DM+1 for each round spent on the same hit.
  • Quick repaired: suspends the effects, but the repair lasts only 1D hours.
  • A button to remove the hit.

Armoured bulkheads: a switch reduces the Severity of critical hits to these systems by 1, to a minimum of 1.

Ship statistics

A disclosure group holds the ship's stats for editing: Starting and Current Hull, Armour and Armour lost, Thrust, Power, Tonnage, fuel capacity and remaining, jump drive, and the crew skills (Gunner, Sensors, Engineer, Leadership). These are useful for custom enemies.

Weapons

Use Add Weapon… on a ship's panel to add a Beam Laser, Pulse Laser, Missile Rack, Sandcaster, Particle Barbette or Other. Each weapon row has:

  • A Status: operational, impaired, disabled or destroyed.
  • The gunner assigned to it, if any, shown by name.
  • Target: a menu in the weapon row (each ship is listed with its range band). With a single possible target it is shown as text, and with none chosen it is the first one. The target is remembered on the weapon, and Attack DMs, Roll Attack, the gunner's duty button, Roll Damage and Launch at all use it.
  • Attack DMs: the range, weapon, target-size, sensor-lock and damaged-weapon modifiers against the selected target, with the total. Where there is a known gunner, their skill and DEX DM are included.
  • Roll Attack: rolls the gunner's Gunner check against the selected target with those modifiers filled in. On your own ship it is player-rolled. The Effect of a successful attack is remembered on the weapon. This needs an assigned crew member, and isn't available for enemy ships whose crews aren't tracked.
  • Roll Damage: rolls the weapon's damage dice from the Spacecraft Scale Weapons table, adds the Effect of the weapon's last successful attack roll (change it with the stepper), subtracts the selected target's Armour and records the hit on it, including a critical hit if the Effect is 6 or more. The remembered Effect is cleared when the damage is applied, after a miss and at the start of the next round. On your own ship the popover says what to roll and takes the player's total (dice plus Effect). A Particle Barbette's ×3 is applied after Armour. If a weapon has no listed damage, type its damage to get a roller.
  • Point defence: a laser turret used for point defence can't attack this round. DM+1 per extra laser is shown.
  • Missile racks and sandcasters: an ammunition stepper (missiles or canisters), and Reload, which finishes at the next round. Missile storage limits reloading to the missiles held (12 per ton in the Ship Designer). Off, the racks reload for free.
  • Sandcasters: Disperse Sand records the defence.

Launching missiles

A missile rack has a Salvo stepper and a Launch at button that fires at the weapon's selected target. A salvo is everything a ship launches at one target in a round, from any number of turrets: further launches at the same target that round join it. A rack launches one missile per round, so a mount launches as many as it has racks. The panel warns when a mount launches more.

Incoming missiles

A ship's panel lists the Incoming Missiles aimed at it:

  • How many missiles, from whom, and when they arrive ("arrives in 2 rounds", or IMPACT this round). A salvo that can't hit is marked inert.
  • Detected: detecting a launch is a Routine (6+) Electronics (sensors) check, or Average (8+) if the firing ship hasn't been detected, with +1 per full 10 missiles (up to +6). Undetected missiles can be picked up each round with an Average (8+) check.
  • Attack DM: shown, including −2 for a launch at Distant range, and the loss of the Smart trait.
  • EW: Electronic Warfare (Difficult 10+ Electronics (sensors)) removes missiles equal to the Effect. Once per salvo per round.
  • PD: Point Defence (a Gunner (turret) check) removes missiles equal to the Effect.
  • Roll Damage: rolls the missiles' 4D damage, subtracts Armour and multiplies by the attack's Effect. For a salvo your ship fired, it takes the player's 4D total instead. The Effect is entered on the salvo's own stepper, as missiles don't use a weapon attack roll.
  • Resolve (when it arrives) or Remove.

Enemy crews

An enemy ship can have a crew, so its skills feed Initiative, attacks and other checks.

  • NPC Traveller… picks Travellers from the universe. A switch limits the list to NPCs, and you can turn it off to pick anyone.
  • Ad Hoc Crew Member makes one from typed-in skill ranks, with one-tap presets for the skills the space combat duties roll. A rank in one speciality gives level 0 in the others, and a skill not listed at all is unskilled (−3). A single DM added to every characteristic covers things like DEX for attacks.
  • Each crew member takes a duty, and a weapon if a gunner. Enemy crew changes take effect at once, in any round, so reinforcements can arrive mid-battle.

The log

Every roll, hit, repair, launch and round change is added to the log under the range display, newest first. The text can be selected and copied, and Clear empties it. The log isn't shown to the players.

What the players see

In Space Combat mode, the Players' Panel shows:

  • The round and step, and the Initiative order.
  • Their ship: Hull, damage (critical hits by location, with any marked as patched), crew duties and weapons, with their ammunition and whether they are reloading or on point defence.
  • Missiles: their own salvos, and incoming ones they have spotted.
  • The range display, with only the ships and missiles they have detected. Nothing on it can be moved.
  • Each duty's options for the current step, for example what a pilot, a gunner or an engineer can do in the Manoeuvre step. Only duties that have something to do in the step get a card. A Reaction section, with the ship's live figures such as unspent Thrust for Evasive Action, and the crew member's own modifier for the action's check ("2D +4 vs 8+").
  • The rules for the step on the right.

There is no log, and nothing on the players' panel can be changed, so the referee runs the battle.

Tips

  • Assign duties before Begin Combat, so Initiative uses the right pilot.
  • Mark enemies undetected at the start. They stay hidden from the players until their sensors pick them up.
  • Type Initiative for the players' ship: it is not rolled by Begin Combat, so the player rolls at the table and you enter their 2D.
  • Use Undo Last Hit if you applied a hit to the wrong ship.
  • Track missiles carefully: launch, then watch the arrival countdown on the target's panel.
  • Use Apply Movement once per round, after everyone has set their Movement Thrust and direction.